|
Product Description
Fuel pump, 12 volt, compact, suitable for diesel, petrol and biofuel.
This compact fuel pump is the most common type of pump used by over 80% of original manufacturers and is further installed by many original equipment manufacturers (OEMS) throughout the world.
Please see below of installers:-
Volvo, Yanmar, Thwaites, Ausa, Takeutchi, Bob Cat, Newson, Mitsubishi, Suzuki, Hino, Kawasaki, Hitachi, Cat, Isuzu, Thermo-king, Lombardini, Pel-Job.
This compact unit is easy to install and can be fitted to the smallest of areas of equipment and can be used for many applications. It delivers an impressive flow rate of up to 1.5 litres per minute. This unit will supply the majority of small and medium engines with fuel.
|
|
Usage
Industrial machine loading small petrol and diesel engine (it is appropriate to the vehicle using carburetor of 550-1000cc as standard of fuel engine displacement)
Agricultural Vehicle: Ideal for marine applications
Lawn Mower: Riding type, walking-type
Fork Lift: Riding type.
Generators: Small type to large size
Characteristics
Good engine low temperature starting performance because of easy supply of fuel by turning the key switch on.
Superior installation layout by miniaturisation
Self intake system
Superior mechanical strength by the constitution of metal case.
Special Qualities
Net voltage: DC12V
Available Voltage span: DC8.5V - DC16.5V
Average Operating Current: Less than 1.5A
Flow Characteristics: 1.5 litres minute, depending on fitting/length/fuel used
Suction Pressure (dry condition) Under - 4.okPa ( reference valve)
Adaptable Environment Temp: Depends on fuel properties. Main body, -30c to +70c
Anti Vibration: To be satisfied test condition of JIS D1601-95, 5.3 (2)
step 45, Automobile Anti Vibration
Water Proof: No abnormal function after test condition of JIS
D0203-94-D1, Automotive Water Proof Liability Test
for Automobile Parts by JIS
Durability: DC14V 1000 Hours operation of normal temperature
( 20+-15C)
Net Weight: Approximately 300g
Coating: Zinc Galvanisation.
Variation
Pipe Diameter: 6.35/8mm
Assembly: Pitch 62mm Direct Assembly type / Pitch 69mm
(20+-15c) Grommet type
|
